UNDER DEVELOPMENT
Within the Smart Parks Stack the integration to Movebank needs to be properly configured.
www.movebank.org
github.com/movebank
User manual
…
¶ Set-up integration between Node-RED and Movebank
- Prepare the Node-RED setup first → more information can be found in the Node-RED section.
Movebank is using a strictly defined dataformat:
The following items seem relevant for the current OpenCollar Edge devices:
Study
- MVB000172 study ID
- MVB000173 study name
- MVB000290 is test
Animal
Device
- MVB000189 tag serial no
- MVB000380 tag firmware
- MVB000191 tag voltage
- MVB000298 voltage resolution
- MVB000188 tag readout method
- MVB000185 tag model
- MVB000183 tag manufacturer name
- MVB000249 CPU temperature
Timestamp
Sensor type
Location data
- MVB000289 is location sensor
- MVB000145 location lat
- MVB000146 location long
- MVB000142 location error numerical
- MVB000284 GPS PDOP
- MVB000116 GPS fix type
- MVB000120 GPS satellite count
- MVB000121 GPS time to fix
Motion data
- MVB000001 acceleration axes
- MVB000006 acceleration x
- MVB000007 acceleration y
- MVB000008 acceleration z
- MVB000197 tilt x
- MVB000198 tilt y
- MVB000199 tilt z
Transmission
- MVB000276 transmission protocol
- MVB000201 transmission timestamp
Receiver → could be used for LoRaWAN Gateway ID
- MVB000265 receiver ID
- MVB000375 receiver latitude
- MVB000376 receiver longitude
Decoding
- MVB000214 data decoding software
Acknowledgments
- MVB000010 acknowledgements